Site Considerations - Grizzly G0973 Owner's Manual

Physical Environment
The physical environment where the machine is
operated is important for safe operation and lon-
gevity of components. For best results, operate
this machine in a dry environment that is free from
excessive moisture, hazardous chemicals, air-
borne abrasives, or extreme conditions. Extreme
conditions for this type of machinery are gener-
ally those where the ambient temperature range
is outside 41°–104°F; the relative humidity range
is outside 20–95% (non-condensing); or the envi-
ronment is subject to vibration, shocks, or bumps.
Space Allocation
Consider the largest size of workpiece that will
be processed through this machine and provide
enough space around the machine for adequate
operator material handling or the installation of
auxiliary equipment. With permanent installations,
leave enough space around the machine to open
or remove doors/covers as required by the main-
tenance and service described in this manual.
See below for required space allocation.
35½"
-12-

Site Considerations

61"
Figure 6. Working clearances.
Weight Load
Refer to the Machine Data Sheet for the weight
of your machine. Make sure that the surface upon
which the machine is placed will bear the weight
of the machine, additional equipment that may be
installed on the machine, and the heaviest work-
piece that will be used. Additionally, consider the
weight of the operator and any dynamic loading
that may occur when operating the machine.
Lighting
Lighting around the machine must be adequate
enough that operations can be performed safely.
Shadows, glare, or strobe effects that may distract
or impede the operator must be eliminated.
Children or untrained people
may be seriously injured by
this machine. Only install in an
access restricted location.
Model G0973 (Mfd. Since 09/23)
Keep Area
Unobstructed