Audio - Axis P3267-LVE User Manual

AXIS P32 Dome Camera Series
Configure your device
3. In the list of conditions, under I/O, select Digital input.
4. Select the relevant port.
5. In the list of actions, under Notifications, select Send notification to email and then select the recipient from the list.
6. Type a subject and a message for the email.
7. Click Save.
Send an email automatically if someone spray paints the lens
Activate the tampering detection:
1. Go to System > Detectors > Camera tampering.
2. Set a duration for Trigger after. The value indicates the time that must pass before an email is sent.
3. Turn on Trigger on dark images to detect if the lens is sprayed, covered, or rendered severely out of focus.
Add an email recipient:
4. Go to System > Events > Recipients and add a recipient.
5. Type a name for the recipient.
6. Select Email.
7. Type an email address to send the email to.
8. The camera doesn't have it's own email server, so it has to log into another email server to send mails. Fill in the rest of the
information according to your email provider.
9. To send a test email, click Test.
10. Click Save.
Create a rule:
11. Go to System > Events > Rules and add a rule.
12. Type a name for the rule.
13. In the list of conditions, under Video, select Tampering.
14. In the list of actions, under Notifications, select Send notification to email and then select the recipient from the list.
15. Type a subject and a message for the email.
16. Click Save.

Audio

Add audio to your recording
Note
To connect the audio device, this product requires a multicable.
1. Go to Video > Stream > Audio and include audio.
2. If the device has more than one input source, select the correct one in Source.
3. Go to Audio > Device settings and turn on the correct input source.
15