Recordings - Axis P3267-LVE User Manual

AXIS P32 Dome Camera Series
The device interface
Allow stream extraction: Turn on to allow stream extraction.
Input type: Select the type of input, for instance if it's a microphone or line-in.
Power type: Select power type for your input.
Activate changes: Click to activate your selection.
Separate gain controls: Turn on to adjust the gain separately for the different input types.
Automatic gain control
Gain: Use the slider to change the gain. Click the microphone icon to mute or unmute.
Output : Shows the type of output.
Gain: Use the slider to change the gain. Click the speaker icon to mute or unmute.
Stream
Encoding: Select the encoding to use for the input source streaming. You can only choose encoding if audio input is turned on. If
audio input is tuned off, click Enable audio input to turn it on.
Audio mixer
Input
Ten Band Graphic Audio Equalizer: Turn on to adjust the level of different frequency bands within an audio signal.
Voice enhancement

Recordings

Click to filter the recordings.
From: Show recordings done after a certain point in time.
To: Show recordings up until a certain point in time.
Source : Show recordings based on source.
Event: Show recordings based on events.
Storage: Show recordings based on storage type.
: Turn on to dynamically adapt the gain to changes in the sound.
: Turn on to adjust the voice content in relation to other sounds.
28