Axis P32 Series Repainting Instructions
Hide thumbs
Also See for AXIS P32 Series:
- User manual (96 pages) ,
- Manual (70 pages) ,
- Repainting instructions (6 pages)
Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Axis AXIS P32 Series
Summary of Contents for Axis AXIS P32 Series
- Page 1 AXIS P32 Network Camera Series AXIS P3245–V AXIS P3245–LV Repainting Instructions...
- Page 2 Risks with repainting There are several risks when disassembling or assembling an Axis product. There is always a certain yield loss during assembly. Training of operators and the use of correct tools mediates some of the problems but they can never be fully avoided. Some of the risks include: ESD Damage - Always handle the product in an ESD safe environment.
- Page 3 AXIS P32 Network Camera Series Repaint the product Repaint the product Preparations • If applicable, disassemble the device according to the instructions in this document. • Clean all parts to be repainted thoroughly to remove grease, dust, or oil. •...
- Page 4 AXIS P32 Network Camera Series Repaint the product 3. For P32-LV, remove the anti-reflection ring. Do not paint it. Repainting 1. Make sure all necessary preparations of the dome cover have been made, see Preparations on page 3 . 2. Apply a thin and even layer of spray paint according to the instructions of the paint manufacturer.
- Page 5 Repainting Instructions Ver. M3.2 AXIS P32 Network Camera Series Date: October 2019 © Axis Communications AB, 2019 Part No. T10137446...
Need help?
Do you have a question about the AXIS P32 Series and is the answer not in the manual?
Questions and answers