Risks with repainting There are several risks when disassembling or assembling an Axis product. There is always a certain yield loss during assembly. Training of operators and the use of correct tools mediates some of the problems but they can never be fully avoided. Some of the risks include: ESD Damage - Always handle the product in an ESD safe environment.
Page 3
AXIS P32 Dome Camera Series Repaint the product Repaint the product Preparations • If applicable, disassemble the device according to the instructions in this document. • Clean all parts that will be repainted thoroughly to remove grease, dust, or oil.
Page 4
AXIS P32 Dome Camera Series Repaint the product 2. Remove the cable cover or conduit cover if you are not going to use it. 3. Remove the anti-reflection ring. Do not paint it. Repainting 1. Make sure all necessary preparations of the dome cover have been made, see Preparations on page 3 .