Axis P3267-LVE User Manual page 21

AXIS P32 Dome Camera Series
The device interface
Contrast: Use the slider to adjust the difference between light and dark.
Brightness: Use the slider to adjust the light intensity. This can make objects easier to see. Brightness is applied after image
capture, and doesn't affect the information in the image. To get more details from a dark area, it's usually better to increase
gain or exposure time.
Sharpness: Use the slider to make objects in the image appear sharper by adjusting the edge contrast. If you increase the
sharpness, it may increase the bitrate and the amount of storage space needed as well.
Wide dynamic range
WDR: Turn on to make both bright and dark areas of the image visible.
Local contrast
dark and light areas.
Tone mapping
zero only the standard gamma correction is applied, while a higher value increases the visibility in the image.
: Use the slider to adjust the contrast of the image. A higher value makes the contrast higher between
: Use the slider to adjust the amount of tone mapping that is applied to the image. If the value is set to
21