Axis P3267-LVE User Manual page 56

AXIS P32 Dome Camera Series
Specifications
Status LED
Unlit
Green
Amber
Amber/Red
Red
Network LED
Green
Amber
Unlit
Power LED
Green
Amber
Microphone power LED
Unlit
Blue
Wireless LED
Unlit
Green
Red
Amber
Note
• The tally LED (indication LED) only indicates network transmission. If video or audio is only transmitted through HDMI
or SDI the tally LED will be unlit.
Indication
Connection and normal operation.
Shows steady green for 10 seconds for normal operation after startup completed.
Flashes green during wireless network pairing.
Steady green for normal operation.
Flashes before startup if the temperature is below -20 °C and heating is required. The product
starts when it reaches operating temperature.
Steady during startup. Flashes during firmware upgrade or reset to factory default.
Steady during startup. Flashes when restoring settings.
Flashes amber/red if network connection is unavailable or lost.
Firmware upgrade failure.
Indication
Steady for connection to a 100 Mbit/s network. Flashes for network activity.
Steady for connection to a 1 Gbit/s network. Flashes for network activity.
Steady for connection to a 10 Mbit/s network. Flashes for network activity.
Steady for connection to a 10/100 Mbit/s network. Flashes for network activity.
No network connection.
Indication
Normal operation.
Flashes green/amber during firmware upgrade.
Indication
Phantom power off.
Phantom power on.
Steady when the phantom power is on and the microphone is connected.
Flashes when the phantom power is on and the microphone is disconnected.
Indication
Wired mode.
Steady for connection to a wireless network. Flashes for network activity.
Steady for no wireless network connection. Flashes while scanning for wireless networks.
Steady or flashing during wireless network pairing.
56