Axis P3267-LVE User Manual page 8

AXIS P32 Dome Camera Series
Configure your device
Note
A high max shutter value can result in motion blur.
• To slow down the shutter speed, set max shutter to the highest possible value.
Note
When you reduce the max gain, the image can become darker.
• Set the max gain to a lower value.
• Open the aperture.
• Reduce sharpness in the image, under Appearance.
If the above settings do not improve the image sufficiently, change to a lens with a lower f-value.
Handle scenes with strong backlight
Dynamic range is the difference in light levels in an image. In some cases the difference between the darkest and the brightest
areas can be significant. The result is often an image where either the dark or the bright areas are visible. Wide dynamic range
(WDR) makes both dark and bright areas of the image visible.
Note
• WDR can cause artifacts in the image.
• WDR may not be available for all capture modes.
1. Go to Video > Image > Wide dynamic range.
2. Turn on WDR.
3. Use the Local contrast slider to adjust the amount of WDR.
Image without WDR.
Image with WDR.
8