Using The Remote Control - SMART Board SBID-6265S-P User Manual

CHAPTER 2
USING BASIC FEATURES
No. Name
1 Power
2 Volume increase
3 Volume
decrease
4
Freeze
5
Screen shade
6 USB Type A
connector (×2)
7 HDMI 3 input
connectors
The Power button indicates the display's status:
Power button
Off
Amber
White

Using the remote control

The display comes with one of two infrared remote control models. These models are similar,
except one has an additional share screen button.
The infrared remote control enables you to turn the display on or off, change the input source,
change the volume, access the display's iQ apps, and more. You can also use the remote control
to open the on-screen menus and change the display's settings.
13 smarttech.com/kb/171415
Procedure
Press to enter or exit Standby mode (see Waking up the
l
display and putting it back to sleep on page 11).
Press and hold for four seconds to turn off the display.
l
Press and hold for 10 seconds to reset the display.
l
Press to increase the volume (see Adjusting the volume on
page 19).
Press to decrease the volume (see Adjusting the volume on
page 19).
Press to freeze and unfreeze the screen (see page 20).
Press to hide screen contents behind a screen shade (see
Showing and hiding the screen shade on page 20).
Connect USB drives and other devices that you want to use
with the iQ experience or a connected computer (see
Connecting USB drives, peripherals, and other devices on
page 33).
Connect a computer or other input source to use with the
display (see page 29).
Display status
Not receiving power
Standby mode
Normal operating mode