Table of Contents
Advertisement
In ve rter S tatu s M on ito rin g, S p ec ia l R eg isters fo r
C o ntro l
(2) Set frequency (RAM) (D9141)
The frequency set to the RAM is read to D9141. The unit is 0.01Hz.
(For example, 6000 indicates 60.00Hz.)
<Set frequency (RAM) read program example>
The following program reads the set frequency (RAM) to D0.
Set frequency read (RAM) setting request
REMARKS
The read frequency is not the command value of the external signal.
(3) Set frequency (E
The frequency set to the E
(For example, 6000 indicates 60.00Hz.)
<Set frequency read (E
The following program reads the set frequency (E
The following program reads the set frequency (E
REMARKS
The read frequency is not the command value of the external signal.
2
PROM) (D9142)
2
PROM is read to D9142. The unit is 0.01Hz.
2
PROM) program example>
120
Turns on set frequency
read (RAM) request pulse.
Stores data to D0 when set
frequency read (RAM)
completion signal turns on.
Turns on set frequency read (RAM)
command. (Until set frequency read
(RAM) completion signal turns on)
2
PROM) to D0.
2
PROM) to D0.
Set frequency read
(E
2
PROM) setting request
Stores data to D0 when set frequency
read (E
2
PROM) completion signal
turns on.
Turns on set frequency read (E
command. (Until set frequency read
(E
2
PROM) completion signal turns on)
PROM)
2
Advertisement
Table of Contents
