System Configuration; System Configuration Example; Regarding Cc-Link Ver. 1.10 - Mitsubishi Electric FR-C500 Instruction Manual

Transistorized inverter
Table of Contents

Advertisement

System Configuration

5.1 System Configuration
5.1.1

System configuration example

(1) PLC side
Mount the "AJ61BT11", "A1SJ61BT11", "AJ61QBT11", "A1SJ61QBT11" or
"QJ61BT11" Control & Communication Link system master/local module on the
main base unit or extension base unit of the PLC CPU that will act as the master
station.
(2) Connect the PLC CC-Link module master station and inverters by CC-Link
dedicated cables.
Master station
CPU
Terminating
resistor
CC-Link dedicated cable
REMARKS
1. Refer to the following manuals for the CC-Link master station.
• Control&Communication Link System Master/Local Module User's Manual... SH-080016
• Control&Communication Link System Master/Local Module type AJ61QBT11/
A1SJ61QBT11 User's Manual ... IB-66722
• Control&Communication Link System Master/Local Module type AJ61BT11/A1SJ61BT11
User's Manual ... IB-66721
2. Refer to page 36 for the CC-Link communication wiring and CC-Link cables.
5.1.2

Regarding CC-Link Ver. 1.10

This product is compatible with CC-Link Ver. 1.10.
For the Ver. 1.10 compatible cables, refer to the manual of the CC-Link master module.
CAUTION
In a system where the CC-Link Ver. 1.00 and Ver. 1.10 modules and cables are used
together, the maximum overall cable length and interstation cable length should
conform to the CC-Link Ver. 1.00 specifications.
Inverter
AJ61
BT11
Power supply
Up to 42 inverters
can be connected
when only inverters
are connected.
Motor
Power
supply
140
Inverter
Terminating
resistor
Motor

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the FR-C500 and is the answer not in the manual?

Questions and answers

Table of Contents