Checking Brake Pads For Wear - Ducati MULTISTRADA V25 Owner's Manual

Checking brake pads for wear

Check brake pads wear through the inspection hole
in the callipers.
Change both pads if friction material thickness of
even just one pad is about 1 mm.
Attention
Friction material wear beyond this limit would
lead to metal support contact with the brake disc
thus compromising braking efficiency, disc integrity
and rider safety.
Important
Have the brake pads replaced at a Ducati
Dealer or authorised Service Centre.
Downloaded from ManualsNet.com search engine
MIN
MIN
Fig 292
Fig 293
329