During this time, Menu scrolling via buttons (1) and
(2) is disabled.
When system is enabled, "ABS ON" is displayed, the
ABS light turns on to indicate that the ABS is active
and buttons (1) and (2) are enabled.
If the ABS status does not change in 5 seconds, the
instrument panel will replace "WAIT ..." message
within the Menu with "ABS-ERR" message blinking
for 3 seconds.
After 3 seconds:
if disabling was requested, the instrument panel
●
automatically shows again "ABS ON" and the
request can be made again, if required;
if enabling was requested, the instrument panel
●
automatically shows again "ABS OFF" and the
request can be made again, if required.
220
Downloaded from
ManualsNet.com
search engine