Ducati MULTISTRADA V25 Owner's Manual page 258

After accessing the Pin Code change function
(Modify Pin), the instrument panel displays "Old Pin"
with spaces allowing to enter the four digits of the
set Pin code. "0" and "- - -". The two arrows on the
digit give the possibility to set it.
Entering the code:
1) Each time you press the button (1) the displayed
number increases by one (+ 1) up to "9" and then
starts back from "0";
2) Each time you press the button (2) the displayed
number decreases by one (- 1) up to "1" and then
starts back from "0";
3) Press button (4) to confirm the number and
move on to the following digit.
4) Repeat the operations under steps 1) - 3) until
you confirm all the 4 digits of the PIN CODE.
Downloaded from ManualsNet.com search engine
Old Pin 0 - - -
...
Old Pin 6 6 6 7
...
1
2 4
Fig 210
1
2 4
Fig 211
257