Ducati MULTISTRADA V25 Owner's Manual page 218

To disable the Trip Master function, scroll down the
Menu by pressing buttons (1) and (2) up to "TRIP
MASTER ON" and press button (4). In this way, the
instrument panel interrupts the function and resets
the count.
To go back to the Trip Master control mode with
active function, scroll down the Menu by pressing
buttons (1) and (2) up to "TRIP MASTER ON" and
press button (1) for 2 seconds. In this way, the
instrument panel will activate the Trip Master
control menu again and the buttons can be used only
for the Trip Master.
When count is 0.0 (Km or miles), the Trip Master can
only be increased and it is not possible to reverse the
count as long as value is below or equal to 100 metres
(0.1 miles).
If value reaches 999.9 (miles or Km), while increasing,
it will get back to zero (0.0) and carry on increasing.
If value reaches 0.0 (miles or Km), while decreasing,
the counting will stop (PAUSE), value will flash and
calculation will be reversed to become increasing.
Value is automatically reset and counter restarts its
increasing operation in the following instances:
upon any power off (Battery-Off);
●
Downloaded from ManualsNet.com search engine
if units of measurement are changed through
●
the Dashboard UNIT SETTING function.
Every time you quit the Trip Master control menu,
the TRIP MASTER function continues the count (or
remains in pause according to the status).
217