Checking Brake Pads For Wear - Ducati Monster 620DARK Owner's Manual

Brake system
If you find exceeding play on brake lever or pedal and brake
pads are still in good condition, contact your Ducati Dealer
or an Authorised Workshop to have the system inspected
and any air drained out of the circuit.
Warning
Brake and clutch fluid will damage paintwork and
plastic parts if accidentally spilled.
Hydraulic oil is corrosive; it may cause damage and lead to
severe injuries.
Never mix different quality oils.
Check seals for proper sealing.
Checking brake pads for wear (fig. 39)
Front brake
To facilitate inspection without removing the pads from
the callipers, brake pads have a wear mark. If the grooves
in the friction material are still visible, the pad is still in good
condition.
Rear brake
The friction material on each pad should be at least 1 mm
thick.
Important
Have the brake pads replaced at a Ducati Dealer or
Authorised Workshop.
E
fig. 39
43