Tyre Setting And Drive Ratio (Tyre Calibration) - Ducati MULTISTRADA V25 Owner's Manual

Tyre setting and drive ratio (Tyre
Calibration)
This function allows the user to run the procedure for
calibrating and teaching in the tyre rolling
circumference and final drive ratio.
Enter the SETTING MENU.
Select "Tire Calibration" option, by pressing button
(1) or (2).
Once function is highlighted, press button (4).
As you enter this function, the instrument panel
displays the following indications:
Back
●
Start
●
Default (*)
●
(*) This indication is visible only if the set parameter
is different from the "default" parameter.
To exit the menu and go back to previous page
highlight the "
or (2) and press button (4).
To start the drive ratio and tyre calibration procedure
press button (4) when "Start" is highlighted.
282
Downloaded from ManualsNet.com
Back" indication using button (1)
search engine
Units
Service
Tire Calibration
Load Mode
Bluetooth
Back
Start
...
1
2 4
Fig 247
1
2 4
Fig 248