Important Information - IDEAL TP10KAC-DX Installation & Operation Manual

Please deliver this manual to the lift owner and/or operator along with all other documentation
provided with the lift. Failure to operate this equipment as intended may cause injury or death.
1. Read this manual thoroughly before installing, operating, or maintaining this lift.
2. This lift is designed for indoor use only and should not be installed in a pit or depression.
3. The floor on which the lift is to be installed must be 4-1/4" minimum thickness concrete,
with a minimum compressive strength of 3,000 psi.
4. The lift has specific electrical requirements as described in the Installation Instructions
section of this manual.
5. This lift has a minimum ceiling height requirement as described in the Installation
Instructions section of this manual.
6. It is recommended that the lift to be located 10' – 12' from the nearest obstruction in
front of the lift and 2' – 3' from the nearest obstruction on each side of the lift.
7. Failure by the owner to provide the recommended shelter, mounting surface, electrical
supply, and ceiling height could result in unsatisfactory lift performance, property damage, or
personal injury.
8. The operation of the lift is permitted by authorized person only.
9. Lift buyers are responsible for any special regional structural and/or seismic anchoring
requirements specified by any other agencies and/or codes such as the Uniform Building
Code (UBC) and/or International Building Code (IBC). When required, it is recommended to
contact a qualitied engineer to address the specific UBC and/or IBC code requirements.

IMPORTANT INFORMATION

7
TP10KAC-DX
July 2018