Table of Contents
Advertisement
12. Mounting Power Unit
A. Mount on the motor pump using 5/16" x 1-1/4" bolts
and nylon nuts provided in the bolt box to Main side
column.
B. Connect the 'blue' Return Line to the 90 degree air
fitting, on side of valve block as shown in ( Fig 10)
C. Connect the hydraulic hose to the 90 degree fitting,
on side of valve block, as shown in (Fig 10).
13. Latch-Release Cable Wiring & Accessories mounting.
A. Mount the safety latch device on each column as shown in ( Fig. 11a & 11b)
Fig. 11a
Off Side Column
20
TP10KAC-DX
July 2018
Fig. 10
Fig. 11b
Main Side Column
Advertisement
Table of Contents
