Safety Information; Note, Caution And Warning; Important Information; Safety Instructions - IDEAL U-2200IEH-XR Installation, Operation & Maintenance Manual

Electro-hydraulic/utv lift bench with retractable ramp, capacity 2,200lbs
Table of Contents

Advertisement

1. Safety Information

1.1 Note, Caution and Warning

This document uses the following conventions—Note, Caution and Warning – to alert you to special
instructions, tips, or hazards for a given procedure. Please familiarize yourself with the conventions described
below.
Indicates important information that requires special attention, such as a procedure for a
specific vehicle, or tips on operating the equipment.
Indicates the potential for damage to equipment, accessories, or the vehicle unless you follow
the instructions or procedure exactly.
Indicates the potential for property damage, personal injury, or death due to hazards
associated with the equipment, vehicle, or environment. Do no perform any procedure until
you have read and understood the warning instructions.

1.2 Important Information

1.
Carefully read this manual thoroughly before installing, operating, or maintaining this lift.
2.
This lift is designed for indoor use only, and should not be installed in a pit or depression.
3.
The lifts have specific electrical requirements as described in the Installation Instructions section of
this manual.
Failure by the owner to provide the recommended shelter, mounting surface, electrical supply,
4.
and ceiling height could result in unsatisfactory lift performance, property damage, or personal
injury.
5.
The operation of the lift is permitted by authorized person only.
6.
Keep this guide as well as all the supplied technical literature in a safe place close to the lift so that
operators are able to read it whenever necessary.
7.
If any confusion, please contact the service provider or your distributor.

1.3 Safety Instructions

1. Do not raise a vehicle on the lift until the initialization is completed as described in this manual.
2. Technicians should be trained to use and care for the lift by familiarizing themselves with the
publications listed above. The lift should never be operated by an untrained person.
3. Do not overload the lift. The capacity of the lift is shown on cover of this document and on the lift's
serial number tag.
4. Positioning the vehicle is very important. Only trained technicians should position the vehicle on the
lift. Never allow anyone to stand in the path of the vehicle as it is being positioned and never
raise vehicle with passengers on vehicles.
3
Oct. 2018
U-2200IEH-XR

Advertisement

Table of Contents
loading

Table of Contents