Panasonic KV-S6055W Service Manual page 78

No Item
12 DIMM SPD
(Information)
13 Memory Test START
14 Sleep Mode START
15 Init. EEPROM START
16 Double Feed Test 0~255
(Check double feed
sensitivity after
setting input-level)
17 Adjust Double feed START
Detector
18 Adjust Length START
Automatically
19 Adjust Front V. START
Position
Automatically
20 Adjust Front H. START
Position
Automatically
21 Adjust Front width START
Automatically
22 Adjust Back V. START
Position
Automatically
23 Adjust Back H. START
Position
Automatically
24 Adjust FB Length START
Automatically
25 Adjust FB V. START
Position
Automatically
26 Adjust FB H. START
Position
Automatically
27 Adjust all position & START
length Automatically
28 Adjust shading START
Note:
- CCD Test AMP1 (2) (Set gain for Amp1 (2) and test)
When checking lighting level only from the front side, set the level
to zero on B. CIS LED (Set LED level and test).
- B CIS LED (Set LED level and test)
When checking lighting level from the back side, set the above
AMP1 to "Lamp OFF".
9.5. Setting Operation (Normal Mode)
9.5.1. Scan Setting Mode (Normal Mode 1)
9.5.1.1. Mode-1
9.5.1.2. Mode-2
9.5.2. Counter Setting Mode (Normal Mode 2)
-
START
Setting Contents
78
Default Factory
Setting
- -
- -
- -
- -
Current -
Value
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -