Panasonic KV-S6055W Service Manual page 172

(17) Adjust Double Feed Detector
(18) Adjust Length Automatically
(19) Adjust Front V. position Automatically
(20) Adjust Front H. position
(21) Adjust Front Width Automatically
(22) Adjust Back V. position
(23) Adjust Back H. position
(24) Adjust FB Length Automatically
(25) Adjust FB V. position Automatically
(26) Adjust FB H. position Automatically
(27) Adjust All position & Length Automatically
(28) Adjust Shading
Automatically
Automatically
Automatically
Push key once.
Yes
(From Section 9.6)
8
Select a menu of Setting Item by
pushing " " or " " key.
Set Test chart on Scanner.
Push key once.
Confirm the Test result.
Test again?
or
Do another Test?
No
Push key once.
9
(To Section 9.6)
(17) Set Adjustment paper.
(18)-(27) Set Test chart A.
(18) Front Side
(19) Front Side (*Set 2pcs of Test
chart on account of including
adjustment for the function of
"Sensor Delay automatically".)
(20), (21) Front Side
(22), (23) Back Side
(24), (25), (26) Set the chart A on the
Flatbed.
(27) Set 7 charts in following order
( 1 to 7 ) to ADF, and set 1
chart ( 8 ) to Flatbed.
1 Front Side
2 Front Side
3 Front Side
4 Front Side
5 Front Side
6 Back Side
7 Back Side
8 Front Side (*Set to Flatbed)
(28) Set Shading paper.
No Error
or
Error Message
Note: Part number of these charts
and paper are shown on
SECTION 15.