1. Manuals
  2. Brands
  3. Panasonic Manuals
  4. Scanner
  5. KV-S6050W
  6. Operating instructions manual

Panasonic KV-S6050W Operating Instructions Manual

High speed scanner
Hide thumbs Also See for KV-S6050W:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Service Manual
These instructions contain the information on operating the scanner. Before reading these
instructions, please go through the installation manual enclosed with this unit.
Please carefully read these instructions, the enclosed installation manual and maintenance
manual. Keep these documentation in a safe place for future reference.
Keep the CD-ROM in the protective case. Do not expose the CD-ROM to direct sunlight or
extreme heat and do not scratch or smudge the surface of the CD-ROM.
KV-S6050W / KV-S6055W /
Model No.
KV-S6050WU / KV-S6055WU

Advertisement

Table of Contents
loading

Related Manuals for Panasonic KV-S6050W

Summary of Contents for Panasonic KV-S6050W

  • Page 1 These instructions contain the information on operating the scanner. Before reading these instructions, please go through the installation manual enclosed with this unit. Please carefully read these instructions, the enclosed installation manual and maintenance manual. Keep these documentation in a safe place for future reference.

  • Page 2: System Requirements

    With these easy-to-use functions, reliable paper handling, easy maintenance and more, Panasonic would like to contribute to your imaging needs. • Difference between the KV-S6055W and KV-S6050W is only the contact image sensor for back scanning. Please refer to page 59 “Specifications” for details. ∫ ∫ ∫ ∫...

  • Page 3: Table Of Contents

    Outside of the scanner ........

  • Page 4: Notice

    Notice Federal Communications Commission Requirements Note : This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
  • Page 5 Notice Español AVISO: PARA EVITAR LLAMAS O DESCARGAS ELÉCTRICAS NO EXPONGA ESTE APARATO A LA LLUVIA NI A LA HUMEDAD. LA TOMA DE CORRIENTE DEBERÁ ESTAR CERCA DE ESTE EQUIPO Y EN UN LUGAR DE FÁCIL ACCESO. Svenska...
  • Page 6 If you lose the fuse cover the plug must not be used until a replacement cover is obtained. A replacement fuse cover can be purchased from your local Panasonic Dealer. If the fitted moulded plug is unsuitable for the socket outlet in your home then the fuse should be removed and the plug cut off and disposed of safely.
  • Page 7 Notice English The product should be used only with a power cord that is supplied by the manufacturer. Français Le produit ne devra être utilisé qu’avec le cordon d’alimentation fourni par le fabricant. Deutsch Dieses Gerät darf nur mit dem vom Hersteller gelieferten Netzkabel verwendet werden. Español Este producto deberá...
  • Page 8 Pour tout renseignement complémentaire sur le papier de nettoyage de rouleaux, voir la feuille de données sur la sécurité du matériel. • Pour la feuille de données sur la sécurité du matériel, s’adresser au revendeur Panasonic. NE PAS APPROCHER DU FEU. Deutsch WARNUNG •...
  • Page 9 Si necesita más información acerca del papel de limpieza de rodillos, consulte la hoja de datos de seguridad del material (MSDS). • Pregunte a la compañía de ventas Panasonic cómo obtener la hoja de datos de seguridad del material. MANTÉNGALO ALEJADO DEL FUEGO. Notice...
  • Page 10 Do not place the unit in an area where there is a lot of smoke, dust, chemical fumes or vibration. Do not place the unit on an uneven or unstable surface. It is recommended that if the scanner has to be moved, at least two people carry it. ≥ ≥ ≥ ≥...

  • Page 11: Operating Environment

    ≥ ≥ ≥ ≥ Power Source • Use a voltage level that does not vary more than ±10 % from the voltage level marked on the nameplate (located on the back side of the scanner ). • Do not use an extension cord.
  • Page 12 Precautions ∫ ∫ ∫ ∫ CD-ROM To prevent the CD-ROMs from accidental damages: Do not touch or write on the surface of the disc. Do not place heavy objects on the disc case or drop the case. Do not leave the disc out of the protective case.

  • Page 13: Component Identification

    When an error occurs, the indicator will change to red, and light steadily or flash. Imprinter door (Top door) Used for attaching the imprinter unit and ink Connectors Used to connect the scanner unit to a host computer. Power cord...
  • Page 14 Component Identification Standard mark Document glass Component Identification Cover sheet (black sheet) CIS glass (For KV-S6055W series only) Scanning section glass...

  • Page 15: Display Panel Instructions

    Display Panel Instructions The required settings must be selected prior to scanning. Information and conditions are shown on the LCD (Liquid Crystal Display). R e a d y ∫ ∫ ∫ ∫ Display panel and keys SCAN COUNTER IMPRINT OTHERS HOME SCAN : Press to enter the scanning setting menu.

  • Page 16: Setting The Language

    Letter”, “Deutsch A4” or “ Press the HOME key. • The display will change to the selected language, then the scanner will be ready. • This setting will remain until it is changed to another setting. S e t E n g l “English...

  • Page 17: Setting The Scanner

    ∫ ∫ ∫ ∫ Setting the scanner The following parameters can be customized using the scanner’s various setting modes. If the application software provides these features, it will be supported by the scanner. Scan menu Item Front side brightness Front side image emphasis...
  • Page 18 Display Panel Instructions Scan menu Item Feed speed Setting the “Detect Skew” Scanning method Save scanning settings (Select memory) Save scanning settings (Execution) Load scanning setting Selection for feed speed when a document is Feed Speed being scanned. Selects whether skew is detected or not Detect Skew detected.
  • Page 19 Counter menu Item Select the counter displayed on the Disp. Counter LCD. Setting the User User Counter Counter Setting the user User Counter counter extender Clear the user User Counter counter. System Count System Count. Imprinter menu Depending on the setting on the “Counter setting menu”, the page number of the scanned document will be printed.
  • Page 20 Clear the “Replace Roll. Warning ≤≤%” display. Selects the product ID. The product ID setting depends on the host computer scanner application you are Product ID using. Allows scanner to emulate other Panasonic scanner. Sleep Mode Sets the time until sleep mode turns ON. Content Page...
  • Page 21 Operation ¥ SCAN IMPRINT HOME Menu keys Press the menu key until the desired menu is displayed. • The SCAN, COUNTER, IMPRINT and OTHERS keys are used as a menu key. • When pressing the SCAN key, the display will appear as shown in the diagram on the right.
  • Page 22 Display Panel Instructions Actual settings ¥ Scan setting menu (by pressing the SCAN key) Number, mode and default display • Pressing the 3 key will change to the next mode. • Pressing the 4 key will change to the previous mode. Front side brightness 0 1 .
  • Page 23 Front side halftone 0 4 . F . H a l f t o n e Back side dropout color 0 5 . B . C o l d r o p • KV-S6055W series only. Back side brightness 0 6 . B . B r i g h t n e s s D s s s s r s s s s L •...
  • Page 24 Not detect H o s t If set to “Detect”, the scanner will sound a buzzer and the power indicator will flash red when double feeding is detected. Even if this buzzer is set to “OFF” in “Setting the buzzer” (see it will still ring.
  • Page 25 Host Stop H o s t Host : The scanner will act in response to commands from the host computer. Stop : The scanner will display double feed error and stop when it detects double feeding. Buzzer : When the scanner detects double feeding, it will sound a buzzer, the power indicator will light red and it will continue scanning.
  • Page 26 Display Panel Instructions Scanning method 1 8 . S c a n M e t h o d Save “Scanning Settings” (Select memory) 1 9 . S a v e S e t t i n g M e m o r y Save “Scanning Settings”...
  • Page 27 Pressing the 1 key or the 2 key will change to another value. Scan User Scan : After scanning one time, the scanner counter will be S c a n cleared. User : This counter is set to the default value.
  • Page 28 Display Panel Instructions Imprinter setting menu (by pressing the IMPRINT key) These setting can be done only when a imprinter unit is installed. Number, item and default display • Pressing the 3 key will change to the next mode. • Pressing the 4 key will change to the previous mode.
  • Page 29 Setting the imprinter orientation 0 4 . P r e o t a t e H o s t • This setting can be done only when an imprinter is installed. Display Panel Instructions Host 180o 270o Prints portrait orientation. Rotates character string 90 degrees and prints.
  • Page 30 Setting the SCSI ID will be activated after turning the power off and turning it on again. Enable Disable When the scanner is located to terminal position on SCSI bus, set to “Enable”. • Setting the terminator will be activated after turning the power off and turning it on again.
  • Page 31 Checking the “Roller Cleaning Warning” 0 6 . C l e a n R o l l e r W a r n i n g Clearing the “Roller Cleaning Warning” 0 6 . C l e a n R o l l e r W a r n i n g C l e a r = <...
  • Page 32 The applications for the scanner which have been set can be used. • An error results if an attempt is made to use a function which are not provided with the KV-S6050W or KV-S6055W series of scanners. • No guarantees are given for complete compatibility.
  • Page 33 This will be displayed when the STOP key is pressed and the scanner stops. Even if the document remains in the scanner, “JAM” will not be 1 2 3 4 5 6 displayed. If the document remains in the scanner, open the ADF door and the front door, then remove it.

  • Page 34: Loading Documents On The Adf

    To prevent double feeding, separate any documents which have been stapled together or stacked, as in a file, before setting in the scanner. 1 Fan the stack of documents to separate all of the edges. 2 Hold both ends of the document and bend them as shown to the right.
  • Page 35 Place the documents on the hopper with the side to be scanned facing up. Then push them in the direction of the arrow until they stop. • Place the documents on the hopper by matching them with the left side of the hopper as shown in the diagrams at the right.
  • Page 36 Be sure to remove the document from the document cover after it is scanned. • When the scanner does not detect a document set in the hopper which has a black or dark area on the opposite side, add a white sheet of paper under the document.

  • Page 37: Loading Documents On The Flatbed

    Loading Documents on the Flatbed One sheet or an entire book document can be scanned on the document glass. Scanning documents in this way is known as “scanning with the flatbed”. ∫ ∫ ∫ ∫ When scanning with the flatbed one time Open the document cover.

  • Page 38: When Scanning With The Flatbed Repeatedly

    Loading Documents on the Flatbed Close the document cover gently. • If the document cover is slammed, the document will move and may not be scanned properly. • Do not open or press down on the document cover during scanning. •...

  • Page 39: Scanning Thick Documents

    After scanning, close the document cover gently. Close the ADF gently. • Push down on both sides of the ADF gently until it clicks into place. • Do not close the ADF holding the hopper extension tray. ∫ ∫ ∫ ∫ Scanning thick documents When scanning thick documents such as a book, please note the following items: •...

  • Page 40: Feeding A Document Manually

    Feeding a Document Manually When scanning a document with multiple pages with the ADF, set the manual feed selector to “MANUAL” and the pages can be scanned one page at a time. Set the manual feed selector to “MANUAL”. • The hopper will then be raised to the proper level for manual feeding.

  • Page 41: Others

    Others ∫ ∫ ∫ ∫ How to use the control sheet If the control sheet is used, the documents under the control sheet are scanned in accordance with the code on the control sheet regardless of scanning condition that is selected previously. •...

  • Page 42: Clearing Paper Jams

    Clearing Paper Jams Torn documents, thin documents or documents that are creased on the top edge may cause paper jams. If a paper jam occurs (“U xx JAM” will be displayed on the LCD), remove the jammed sheet according to the following procedure.

  • Page 43: Removing Paper Jams From The Exit Path

    ∫ ∫ ∫ ∫ Removing paper jams from the exit path If a jammed document appears at the exit part, pull the exit document stopper towards you, open the front door and pull the document forward, then close the front door. •...

  • Page 44: Cleaning The Unit

    • Clean the scanning section glass, CIS glass, sensor plate and sensor roller when black or white lines appear on the scanned images. NOTE : There is no CIS glass and no sensor roller for the KV-S6050W / KV-S6050WU. • If the documents that will be scanned are dirty, then the scanner parts may become dirty as well.
  • Page 45 Use the accessory roller cleaning paper (KV-SS03) to remove the dirt from the surfaces of all rollers. • When wiping off the dirt, hold the rollers to prevent them from rotating. Wipe the rollers completely from one end to the other.
  • Page 46 Cleaning the Unit Pull exit document towards you and use your hand to pull the front door release towards you. Then open the front door completely. Use the accessory roller cleaning paper (KV-SS03) to remove the dirt from the surfaces of all rollers. •...

  • Page 47: Sensors And Paper Detection Sensor

    Close the ADF door. • Push both sides of the ADF door down gently until it clicks into place. • Since the roller are located on the left side of the ADF door, there is more weight on the left side. Therefore, it is important to note that the door needs to have tension evenly divided to close it properly.
  • Page 48 Cleaning the Unit Remove the dirt on the document sensors, double feed detection sensors and paper detection sensor using the included blower. Paper detection sensor Double feed detection sensor How to clean the document sensor, ¥ ¥ ¥ ¥ double feed detection sensor or paper detection sensor Remove the brush and blow off the dirt through the document...
  • Page 49 (Refer to page 50 for re-attachmant.) • There is no CIS glass and no sensor roller for the KV-S6050W/KV-S6050WU. stopper Front door release (Inside the front door ) Document sensors Sensor roller ¥ How to clean the document sensor...
  • Page 50 Warning” display. (See Re-attachment of the sensor roller ¥ When the sensor roller is removed while cleaning the inside of the scanner, re-attach it as shown below. Lower sensor roller: Attach the roller by placing the no-gear side to the left side of the scanner and inserting both side’s bearings into the guide grooves.

  • Page 51: Document Glass And Cover Sheet

    Please use the roller cleaning paper immediately after opening the bag. The roller cleaning paper (Model No. KV-SS03) is available from the dealer where you § purchased your scanner. For supplies and accessories: Call 1-800-346-4768 (U. S. A. only) or your dealer. 37.) using Document glass 38.)

  • Page 52: Replacing Consumable Roller Modules

    Replacing Consumable Roller Modules If “Warning Replace Roller” message is displayed on the LCD, replace the paper feed roller module, separation roller module and retard roller module at the same time. Confirm that the manual feed selector is set to “AUTO”, turn the power off and unplug the power cord.
  • Page 53 Remove the paper feed conveyor by first lifting it slightly and then pulling it toward you. • Do not apply any force or weight to the paper feed conveyor since doing so may bend it out of shape. Hold the paper feed roller module gear and pull the gear side in the direction of arrow 1.
  • Page 54 (1) Then push up the gear side bearings and install into the left side guide grooves of the chassis in the scanner. When installing the second one, it clicks into place. (2) •...
  • Page 55 Tilt the paper feed conveyor at a slight angle pointing downward and attach it as shown in the diagram to the right. Close the paper feed conveyor. • Push up the paper feed conveyor until it clicks into place. • You are now finished attaching the paper feed roller module and separation roller module.
  • Page 56 Replacing Consumable Roller Modules Pull the right side of the shaft in the direction of arrow (1), and hold it there. Pull the retard roller module in the direction of arrow (2), and then remove it. Take out the retard roller module in the optional “Roller Exchange Kit (KV-SS044)”.
  • Page 57 Close the conveyor by pushing it into the unit. • When the conveyor is closed, the click- stop mechanism will operate. • If the conveyor is not closed correctly and the operation in step 15 is done, the conveyor may break. Close the ADF door.

  • Page 58: Repacking Instructions

    Please use the original carton and all of the original packing materials. If you do not have the original packing materials, these are available from your Panasonic dealer. Please refer to your service dealer, or call 1-800-833- 9626 (U.S.A. only) or your dealer.

  • Page 59: Specifications

    The red lamp option (KV-SS045) must be installed by a trained service engineer. Consult your dealer. • If the red lamp is installed, any red letters on the back side of the document will automatically not be scanned. Model No. KV-S6050W Simplex scanning CCD image sensor Flatbed 1.5 sec (1 paper, letter size, 200 dpi)
  • Page 60 Specifications Item Scanning face Scanning method Readout speed Resolution Tonal gradation Scanner Image control Paper Hopper capacity External dimensions (Width a Depth a Height) Mass (Weight) Power requirement Unit Power consumption Operating Operating temperature and humidity Environment Storage Storage temperature and humidity...

  • Page 61: Troubleshooting

    Clean the sensor roller. (See pages 47 through 50.) Turn the computer OFF. Turn the scanner ON, and then turn the computer ON again. Confirm the SCSI ID, product ID and terminator, and then set them correctly. Use a shielded cable which is as short as possible.
  • Page 62 Troubleshooting Symptom There is dust from the paper on the double feed detection sensor. The double feed detection sensor is not operating. The double feed detector sensitivity setting does not match the scanning document. Black dots or white The document glass and cover sheet are patches occur when dirty.
  • Page 63 Dust adheres to the paper detection sensor. The document is jammed or the document has been feeded obliquely. A document remains in the scanner. Dust adheres to the document sensors. A document has been feeded obliquely. Multiple sheets were fed into the unit.
  • Page 64 An interface board has not been installed. Remedy Close the front door . Close the ADF door. Close the imprinter door. Close the document cover. Please consult with a service representative. Call technical service support. Reinstall scanner’s interface board.

  • Page 65: Index

    Index AC inlet ......ADF door ..... . . ADF door release .
  • Page 66 Index Landscape ......LCD (Liquid Crystal Display) ..Load scanning setting .
  • Page 67 Panasonic Digital Imaging Solutions Company Business Unit of Matsushita Electric Corporation of America Two Panasonic Way, Secaucus, New Jersey 07094 Panasonic Canada Inc. 5770 Ambler Drive, Mississauga, Ontario, L4W 2T3 Matsushita Electric Industrial Co., Ltd. Web Site : http://www.panasonic.co.jp/global/ E-0529...

This manual is also suitable for:

Kv-s6055wKv-s6050wuKv-s6055wu

Table of Contents