from the original position, and the paper-feed function may not
work well.
7.3. Roller Cleaning / Conveyor Roller 1-5
1. Conveyor Roller 1, 2
(1) Turn off the Power.
(2) Open the ADF Door.
(3) Clean these rollers using the cleaning paper (KV-SS03) to wipe
the dirt on the surface of the rollers.
2. Conveyor Roller 3, 4, 5
(1) Turn off the Power.
(2) Open the Front Door.
(3) Clean these rollers using the cleaning paper (KV-SS03) to wipe
the dirt on the surface of these rollers.
(Same as cleaning the CIS, Sensor Plate, ADF Glass)
Fig. 7-3
Fig. 7-4
21