(See 8.2.9.)
2. Remove 5 screws and RELAY (BACK) Board.
3. Disconnect CN501, CN502, CN503, CN504, CN505, / CN513, CN515,
and CN522.
Note:
See SECTION 11 BLOCK DIAGRAM for connections.
8.4.19. RELAY (SIDE) Board
1. Remove ADF Side Panel L.
(See 8.2.6.)
2. Remove 4 screws and RELAY (SIDE) Board.
3. Disconnect all connectors from/to RELAY (SIDE) Board.
Note:
See SECTION 11 BLOCK DIAGRAM for connections.
Fig. 8-70
Fig. 8-71
68