4. When Hopper cam is in condition as shown in Fig. 6-5, the paper
can be set.
5. When the Hopper cam rotates in the direction of arrow as shown
in Fig. 6-6, it pushes up Hopper spring, and enables to paper
feeding by attaching Hopper Plate to Paper Feed Roller.
6. And when the Hopper cam still more rotates in the direction of
arrow, the cam rotates until the position as shown in Fig. 6-5, and
Hopper Plate goes down.
6.5. Optical Unit
The light reflected from the paper surface is transmitted via mirrors A
transmitted to CCD surface through the lens at last.
7. MAINTENANCE
7.1. Maintenance Chart
C : Clean,
R: Replace
Fig. 6-7
( x 1000 Sheets )
18
B
C
D
E, and is