Panasonic KV-S6055W Service Manual page 162

(2) Clean Roller (Set counter for roller cleaning timing.)
(3) Replace Roller (Set counter for roller replacement timing.)
(4) Detect Size
(5) Adjust value for Paper Length manually
(6) Adjust value for Front V. Position manually
(7) Sensor Delay (Adjust value for Sensor
Delay manually)
(8) Adjust value for Front H. Position manually
(9) Adjust value for Front Width manually
(10) Adjust value for Back V. Position manually
(11) Adjust value for Back H. Position manually
(12) Adjust value for FB Length manually
(13) Adjust value for FB V. Position manually
(14) Adjust value for FB H. Position manually
(15) Lamp (Set lamp color.)
(16) Double Feed (Set detection level.)
Note:
*Execute the Item (5) "Adjust value for Paper Length manually" before Items (6) "Adjust value for Front V. Position manually" and
*Execute the Item (12) "Adjust value for FB Length manually" before Item (13) "Adjust value for FB V. Position manually" and
*Execute the Item (9) "Adjust value for Front Width manually" before Item (8) "Adjust value for Front H. Position manually" and
(From Section 9.6)
7
Select a menu of Setting Item by
pushing " " or " " key.
Set the parameter by pushing
" " or " " key.
Yes
Change
the parameter of another
item?
No
Push key once.
9
(To Section 9.6)
(2) Set paper scanning numbers
to clean roller
Default; 50,000_
(3) Set paper scanning numbers
to replace roller
Default; 300,000_
(4) A4/Letter
(5) ; 0.1 % longer
; 0.1 % shorter
(6) ; 0.1mm to lower side
; 0.1mm to upper side
(7) 80-255
; 0.1msec longer delay-time
; 0.1msec shorter delay-time
(8) ; 0.1mm to the right
; 0.1mm to the left
(9) ; 0.1 % Reduce
; 0.1 % Expand
(10) Same as (6)
(11) Same as (8)
(12) ; 0.1 % longer
; 0.1 % shorter
(13) ; 0.1mm to lower side
; 0.1mm to upper side
(14) ; 0.1mm to the right
; 0.1mm to the left
(15) Green/Red
(16) 118/128/138
(10) "Adjust value for Back V. Position manually".
(14) "Adjust value for FB H. Position manually".
(11) "Adjust value for Back H. Position manually".