Panasonic KV-S6055W Service Manual page 3

4. Do not grasp IC or LSI pins with bare fingers.
2. SPECIFICATIONS
Item
Scanner Scanning face
Scanning method
Readout
speed
Resolution
Tonal gradation
Image control
Paper
Interface (Transfer rate) SCSI 3 (20MB/sec)
Hopper capacity
Simplex scanning
ADF front side/Flatbed : CCD
image sensor
Flatbed 1.5 sec (1 paper, letter size, 200 dpi)
ADF
Simplex scanning : Approx. 55 ppm.
(Letter, fed lengthwise, 200 dpi)
Duplex scanning : Approx. 82 ipm.
(KV-S6055W(U) only) (Letter, fed lengthwise, 200 dpi)
Flatbed/
Main scanning direction : 100~600 dpi (1 dpi step)
ADF
Sub-scanning direction : 100~600 dpi (1 dpi step)
Optical resolution is 400 dpi.
Binary mode, Grayscale mode (4/8 bit), 64-step gradation, (dither)
mode, 64-step gradation (error diffusion) mode
Image emphasis, Dynamic threshold (DIMM required), Automatic
threshold, Automatic separation, Monochrome reversing,
Automatic back control
Size for ~298x432mm (11.7x17 in.)
Flatbed
Size for
Scanning size
ADF
70x169mm (2.8x6.7 in.), and
106x148mm (4.2x5.8 in.) to 298x432mm (11.7x17 in.)
Feeding size
70x169mm (2.8x6.7 in.), and
106x148mm (4.2x5.8 in.) to 305x432mm (12x17 in.)
Single paper feeding : 0.05 to 0.15mm (2.0 to 5.9 mils)
Thickness
for ADF Continuous paper feeding : 0.06 to 0.15mm (2.4 to 5.9 mils)
Note : 1 mil=1/1000 in.
Weight
Single paper feeding : 40 to 127g/m
for ADF
Continuous paper feeding : 50 to 127g/m
200 sheets [64g/m
3
Model No.
KV-S6050W
KV-S6050WU
(17 lbs.) un used paper]
2
KV-S6055W
KV-S6055WU
Duplex scanning
ADF front side/Flatbed : CCD
image sensor
ADF back side : CIS
(Contact Type Image Sensor)
(10.6 to 34 lbs.)
2
(13 to 34 lbs.)
2