Certification; Approvals; Csa - Siemens SIMATIC NET RUGGEDCOM RSG910C Installation Manual

Certification

The RUGGEDCOM RSG910C device has been thoroughly tested to guarantee its
conformance with recognized standards and has received approval from recognized
regulatory agencies.
6.1

Approvals

This section details the standards to which the RUGGEDCOM RSG910C complies.
6.1.1

CSA

This device meets the requirements of the following Canadian and U.S. standards
under certificate CSA 18CA70171440:
•
•
•
•
•
•
•
RUGGEDCOM RSG910C
Installation Manual, 04/2022, C79000-G8976-1405-11
CAN/CSA C22.2 No. 62368-1-07 AMD 2:2014
Information Technology Equipment – Safety – Part 1: General Requirements
CSA Std. C22.2 No. 213-16
Non-Incendive Electrical Equipment for Use in Class I, Division 2 Hazardous
Locations
CAN/CSA-C22.2 No. 60079-0:15
Explosive Atmospheres – Part 0: Equipment – General Requirements
CAN/CSA-C22.2 No. 60079-15:16
Electrical Apparatus for Explosive Gas Atmospheres – Part 15: Construction, Test
and Marking of Type of Protection "n" Electrical Apparatus
ANSI/UL 62368-1-2014
Information Technology Equipment – Safety Part 1: General Requirements
ANSI/ISA-12.12.01-2015
Non-Incendive Electrical Equipment for Use in Class I and II, Division 2 and Class
III, Division 1 and 2 Hazardous (Classified) Locations
ANSI/UL 60079-0:13
Electrical Apparatus for Explosive Gas Atmospheres – Part 0: General
Requirements
6
31