Copper Ethernet Port Specifications; Operating Environment; Mechanical Specifications - Siemens SIMATIC NET RUGGEDCOM RSG910C Installation Manual

Standard
1588-2008
62439-2:2016
5.4

Copper Ethernet Port Specifications

The following details the specifications for copper Ethernet ports that can be ordered
with the RUGGEDCOM RSG910C.
Speed
Connector
Duplex
Cable Type
Wiring Standard
Maximum Distance
Isolation
a
Auto-negotiating.
b
Shielded.
c
Auto-crossover and auto-polarity.
d
Typical distance. Dependent on the number of connectors and splices.
e
RMS 1 minute.
5.5

Operating Environment

The RUGGEDCOM RSG910C is rated to operate under the following environmental
conditions.
Ambient Operating
Temperature
Ambient Storage Temperature
Ambient Relative Humidity
Maximum Altitude
a
Measured from a 30 cm (12 in) radius surrounding the center of the enclosure.
b
Operating temperature may vary based on the limitations of installed SFPs. Refer to the "RUGGEDCOM
SFP Transceivers Catalog" for SFP temperature ratings.
c
Non-condensing.
5.6

Mechanical Specifications

Weight
Ingress Protection
Enclosure
RUGGEDCOM RSG910C
Installation Manual, 04/2022, C79000-G8976-1405-11
10 Mbps
Ports
IEEE •
IEC •
a
10/100/1000Base-TX
RJ45
a
FDX/HDX
b
> CAT 5
c
TIA/EIA T568A/B
d
100 m (328 ft)
e
1.5 kV
ab
c
5.4 Copper Ethernet Port Specifications
100 Mbps 1000 Mbps Ports
Ports
• •
• •
-40 to 85 °C (-40 to 185 °F)
-40 to 85 °C (-40 to 185 °F)
5% to 95%
2000 m (6562 ft)
2.4 kg (5.3 lbs)
IP40
Die Cast Aluminum
Technical Specifications
Notes
Precision Time Control
(PTP) Version 2
Media Redundancy
Protocol (MRP)
27