HID HDP5000 User Manual page 7

HDP5000 & HDPii Card Printer Encoder User Guide_L000950, 2.0
1.2 Safety Messages (review carefully)
Symbol Critical Instructions for Safety purposes
Failure to follow these guidelines results in personal injury or death.
To prevent personal injury or death:
This device is electro statically sensitive. You may damage the device if
exposing it to static electricity discharges.
To prevent damage:
This symbol warns of an electrical hazard that could result in personal injury or
death.
For safety purposes, do not use Ethernet for a direct connection outside of the
building.
December 2012
• Reference the following safety messages before performing an operation.
• Always remove the power cord prior to performing repair procedures,
unless otherwise specified.
• Ensure only qualified personnel perform these procedures.
• Reference the following safety messages before performing an
operation.
• Observe all established Electrostatic Discharge (ESD) procedures
while handling cables in or near the Circuit Board and Printhead
Assemblies.
• Always wear an appropriate personal grounding device.
• Always remove the Ribbon and Cards from the Printer before making
any repairs, unless otherwise specified.
• Remove jewelry and thoroughly clean hands before working on the
Printer.
© 2012 HID Global Corporation. All rights reserved.
Page 7 of 103