HID HDP5000 User Manual page 19

HDP5000 & HDPii Card Printer Encoder User Guide_L000950, 2.0
3.2 Selecting the Configuration tab
Figure 2 - Configuration
Step Procedure
Select the Configuration tab.
1
• Under Optional Printer Features, select features by clicking a check box.
The Default setting is checked.
If checked, upon Configuration tab activation, the Driver retrieves the installed Printer
•
features information from the Firmware and automatically checks the appropriate
check boxes for Dual Sided, Lamination and Magnetic Encoder.
• If checked, the Dual Sided, Laminator, and Magnetic Encoder checkboxes are read
only.
• If checked and no Printer is found or bi-directional capabilities are disabled or
unavailable, the error message (shown) is displayed.
• If unchecked or cleared, feature check boxes become active and can be manually set.
• If the Driver is reinstalled, it resets to the default of checked.
• Under Event Monitoring, select events to be monitored. (Note: The Driver prompts
the User when the selected events occur.)
• Under Set Language for Printer LCD Display, select a language.
Note: See the following sections for Event Monitoring and Language Set.
December 2012
© 2012 HID Global Corporation. All rights reserved.
Page 19 of 103