HID HDP5000 User Manual page 15

HDP5000 & HDPii Card Printer Encoder User Guide_L000950, 2.0
3 Printer Driver Operations
3.1 Using the Card tab
Figure 1 – Card
3.1.1 Selecting the Card Size
Step Procedure
Select the Card Size option:
1
• CR-80: This selection is the default form size for the PRINTER. This will print a 2.125 X
3.374 image including a .04 over-bleed on each of the 4 sides making the overall form
size 2.204 X 3.452 (56 X 87.7 mm).
Custom: Use this selection to create a custom form size from 1.0 x 3.0 to 2.204 to 3.452
•
(25.4 X 76.2 mm to 56 X 87.7 mm).
The dimensions of the total print area for each card size appears in the Print Width and Print
Length boxes.
• These print area dimensions are .04" (1mm) larger than the actual card size. This is so
the Printer can overprint images ensuring they appear Edge-to-Edge when transferred to
the card.
• When designing a card format, set the card or page size within the card design program
to the exact Print Length and Width dimensions listed in the Printer Driver.
December 2012
© 2012 HID Global Corporation. All rights reserved.
HDP5000 Only
Page 15 of 103