HID HDP5000 User Manual page 16

3.1.2 Selecting the Card Type
From the Card Type dropdown list, select the desired Card Type according to the composition of
the card stock.
Step Procedure
1 You have these selections (to choose from) Normal print mode:
• Fargo UltraCard III (Default Card Type) = 175 and 2.0 sec.
• Fargo UltraCard Premium = 185˚ and 2.0 sec
• Fargo Ultracard = 175˚and 2.0 sec
• HID Tech Card Composite = 190˚ and 2.0 sec
• HID Tech Card PVC =185˚and 2.0 sec
• Indala FlexISO – Standard (FPISO) = 185˚and 2.0 sec
• Indala FLexISO XT-Composite (FPIXT) 190˚ and 2.0 sec
• Custom 1 = 175˚and 2.0 sec
• Custom 2 = 175˚and 2.0 sec
Defaults: The Printer Driver software has default Transfer Temperature and Dwell Time settings
that deliver the best transfer for these card types. These defaults automatically configure based
on the card type, Ribbon type and whether printing single- or dual-sided.
Card Type Selection: Before printing, if using these standard Fargo card types, ensure
selecting the appropriate card type from the Card tab of the Printer Driver.
Proper Settings: Not all card types are accommodated by these default settings. In some
cases, experimentation is required to find the proper settings.
IMPORTANT:
used during the image transfer process resulting in poor adhesion of the InTM Film or card
warping.
Page 16 of 103
HDP5000 & HDPii Card Printer Encoder User Guide_L000950, 2.0
If you select the wrong option, the wrong Dwell Time and temperature may be
© 2012 HID Global Corporation. All rights reserved
December 2012