14.3
Removing the rear wheel
14.4
Installing the rear wheel
Warning
Danger of accidents Oil or grease on the brake discs reduces the braking effect.
–
Always keep the brake discs free of oil and grease.
–
Clean the brake discs with brake cleaner when necessary.
Warning
Danger of accidents There is no braking effect to start with at the rear brake after installing the rear
wheel.
–
Actuate the foot brake several times before going on a ride until you can feel a firm pressure point.
Preparatory work
–
Raise the motorcycle with the rear lifting gear. (
Main work
–
Remove screw
the hole.
–
3
Remove nut
–
Take off chain adjuster
–
Hold the rear wheel and remove wheel spindle
washer and chain adjuster
–
Push the rear wheel forward as far as possible and take the
chain off the rear sprocket.
Warning
Danger of accidents Damaged brake discs reduce
the braking effect.
–
Always lay the wheel down in such a way that the
brake disc is not damaged.
–
Pull the rear wheel back and take it out of the link fork.
Info
F02824-11
Do not operate the foot brake lever when the rear
wheel is removed.
–
Remove spacers
F01414-10
Main work
–
Check the rear hub damping rubber pieces.
WHEELS, TIRES 14
1
and pull wheel speed sensor
with the washer.
4
.
4
.
6
.
p. 51)
2
out of
5
with the
(
p. 79)
77