15.7
Checking the headlight setting
15.8
Adjusting the headlight range
Tip
Put a spare fuse in the fuse box so that it is available if
needed.
–
Check the function of the electrical power consumer.
–
Close the fuse box cover
Finishing work
–
Mount the front rider's seat. (
–
Mount the passenger seat. (
–
Park the vehicle on a horizontal surface in front of a light-
colored wall and make a mark at the height of the center of
the low beam headlight.
–
Make another mark at a distance
Guideline
B
Distance
–
Position the vehicle upright at distance
switch on the low beam.
400726-10
Guideline
A
Distance
–
The rider now mounts the motorcycle with luggage and pas-
senger if applicable.
–
Check the headlight setting.
The light-dark boundary must be exactly on the lower
marking when the motorcycle is ready to be operated with
the rider mounted along with any luggage and a passenger
if applicable.
»
If the boundary between light and dark does not meet
specifications:
–
Adjust the headlight range. (
Preparatory work
–
Check the headlight setting. (
Main work
–
Loosen screw
–
To set the headlight range of the headlight, swivel the head-
light upwards or downwards.
Info
Swiveling the headlight upwards increases the
headlight range. Swiveling the headlight downwards
reduces the headlight range.
If you have a payload, you may have to correct the
F02835-10
headlight range.
ELECTRICAL SYSTEM 15
1
.
p. 55)
p. 54)
B
under the first marking.
5 cm (2 in)
A
5 m (16 ft)
p. 91)
p. 91)
1
.
from the wall and
91