Abs Display; Info Display; Odo Display - Husqvarna SVARTPILEN 200 2022 Owner's Manual

7 COMBINATION INSTRUMENT
7.10
7.11
7.12
28

ABS display

H03973-01

Info display

F01387-01

ODO display

F01375-01
–
Press the MODE button briefly and repeatedly until ABS
appears on the display.
ABS indicates the selected ABS mode.
Info
The ABS mode can only be changed when the vehicle is
stationary.
Press the MODE button briefly to change to the next dis-
play mode in the display.
–
Press the MODE button briefly and repeatedly until Info
appears on the display.
Info indicates warnings that have occurred.
Info
The Info display is only shown if a message or warning is
pending.
The warnings that have occurred are saved in the
Info display until these are no longer active.
All warnings that have occurred are shown automatically
in succession on the Info display.
Press the SET button briefly to change to the next warn-
ing in the display.
Press the MODE button briefly to change to the next dis-
play mode in the display.
Press the MODE button briefly and repeatedly until ODO
appears in the display.
Info
ODO displays the total distance covered.
This value is retained, even if the 12-V battery is discon-
nected from the vehicle or the fuse blows.
ODO is always running and counts up to 999.999.
When the odometer reaches 999.999, it starts count-
ing from 0 again and the combination instrument dis-
plays ODO ROLL OVER after each time the ignition is
switched on and off.
Press the SET button briefly to change to the next menu
in the display.
Press the MODE button briefly to change to the next dis-
play mode in the display.