Table of Contents
Advertisement
7 COMBINATION INSTRUMENT
7.1
7.2
22
Combination instrument
F02662-10
Activation and test
F01370-01
The combination instrument is attached in front of the handlebar.
1
Indicator lamps (
p. 24)
2
Display (
p. 26)
3
Function buttons (
p. 27)
Activation
The combination instrument is activated when the ignition is
switched on.
Info
The brightness of the displays is controlled by an ambient
light sensor in the combination instrument.
Test
When the ignition is switched on, all indicator lamps light up
briefly except for the turn signal indicator lamp.
The segments in the tachometer and the gear display light up
and switch off in sequence.
The speedometer counts from 0 to 299 and back.
The remaining display segments of the display light up briefly.
The PIONEERING SINCE 1903 logo appears on the display.
The selected ABS mode is then displayed for four seconds.
The display then changes to the last selected mode.
Info
The malfunction indicator lamp always lights up as long as
the engine is not running. If the engine is running and the
malfunction indicator lamp lights up, stop (taking care not
to endanger yourself or other road users in the process)
and contact an authorized Husqvarna Motorcycles work-
shop.
The ABS warning lamp lights up until a speed of approx.
6 km/h (approx. 4 mph) or more has been reached.
Advertisement
Table of Contents
