The Default Fields Do Not Refresh - HP MFP Analog Fax Accessory 300 Fax Manual

5
6
7
8
9
10 In the HP MFP Send Fax Properties dialog box, click Device
11 In the Automatic Configuration: drop-down menu, select
12 Click OK.

The default fields do not refresh

The information in the sender information fields on the Setup tab is
updated the first time that the sender information is entered in the
sender information fields in the Default Settings dialog box. If the
default sender information is changed later, the sender information
fields on the Setup tab are not refreshed. The changes are saved, but
48 Chapter 4 Troubleshooting
Touch CUSTOM to open the billing code screen.
Use the up and down arrows to select the minimum number of
digits in the billing code.
Touch OK to enable billing codes.
Click Start, click Settings, and then click Printers and Faxes.
Under Printer Tasks on the Printers and Faxes window,
right-click the name of the MFP and then click Properties.
Settings.
Update Now.
ENWW