The Bitmap Does Not Appear Or Print On The Cover Page; The Preview Does Not Appear; A Billing Code Is Required After Disabling The Feature - HP MFP Analog Fax Accessory 300 Fax Manual

To complete the firmware update, use the following steps:
1
2
3
4
5
6
7
8
If PC FAX SEND still does not appear on the MFP control panel, see
the HP LaserJet MFP Analog Fax Accessory 300 Fax Guide to
ensure that the analog fax accessory is configured correctly.
If the analog fax accessory is configured correctly and PC FAX SEND
still does not appear on the MFP control panel, contact HP Customer
Care.
The bitmap does not appear or print on the cover
page
The bitmap file will not appear or print on the cover page if the bitmap
file is too large. The fax image-rendering process will bypass
rendering the image on the cover page if the performance of the
computer would be significantly reduced. Reduce the size of the
bitmap to include it on the cover page.

The preview does not appear

To see a preview of the fax job, select Show Preview Before
Sending Fax on the Setup tab.
A billing code is required after disabling the
feature
A billing code is required in the Billing Code text box on the Fax Job
tab after the billing code feature has been disabled at the MFP.
To update the driver so that the Billing Code text box does not
appear on the Fax Job tab, use the following steps:
1
46 Chapter 4 Troubleshooting
Verify that the MFP firmware has been updated to the most
current version available. If the firmware has not been updated,
see "Upgrading the MFP firmware and downloading the driver" on
page 3.
Turn the MFP off and then turn it on again.
On the MFP control panel, press Menu.
Scroll to and touch FAX.
Scroll to and touch FAX SEND.
Scroll to and touch PC FAX SEND.
Touch ENABLED.
Touch EXIT.
Click Start, click Settings, and then click Printers and Faxes.
ENWW