Table of Contents
Advertisement
ABOUT THIS MANUAL
This user manual describes ADC's DSX-3 (DSX-4H-24) Rear Cross-Connect System and its
applications in large and small offices, digital loop carriers, and customer premises. The
manual also provides all instructions necessary to install, operate, and maintain the system.
RELATED PUBLICATIONS
Listed below are related manuals and their publication numbers. Copies of these publications
can be ordered by contacting the ADC Technical Assistance Center at 1-800-366-3891
(in U.S.A. or Canada) or 952-946-3000, extension 63475 (outside U.S.A. and Canada).
Title
DSX-3 (DSX-4H-24) Rear Cross-Connect Installation Guide
DS3 Digital Signal Cross-Connect (DSX-3) System Applications Guide
ADMONISHMENTS
Important safety admonishments are used throughout this manual to warn of possible hazards
to persons or equipment. An admonishment identifies a possible hazard and then explains
what may happen if the hazard is not avoided. The admonishments — in the form of Dangers,
Warnings, and Cautions — must be followed at all times. These warnings are flagged by use
of the triangular alert icon (seen below), and are listed in descending order of severity of
injury or damage and likelihood of occurrence.
Danger: Danger is used to indicate the presence of a hazard that will cause severe personal
injury, death, or substantial property damage if the hazard is not avoided.
Warning: Warning is used to indicate the presence of a hazard that can cause severe
personal injury, death, or substantial property damage if the hazard is not avoided.
Caution: Caution is used to indicate the presence of a hazard that will or can cause minor
personal injury or property damage if the hazard is not avoided.
ADCP-80-314 • Issue 6 • January 2001 • Preface
2001, ADC Telecommunications, Inc.
ADCP Number
80-321
80-323
Page vii
Advertisement
Table of Contents
