Office Record Keeping; Physical Description - ADC DSX-3 User Manual

ADCP-80-314 • Issue 6 • January 2001 • Section 1: Description and Application

4.7 Office Record Keeping

The DSX-4H-24 minimizes office record keeping by providing vertical and horizontal
marking for identifying equipment locations and city terminations. In addition, red LED tracer
lamps allow for easy identification of equipment cross-connected at the cross-connect system.

5 PHYSICAL DESCRIPTION

Front and rear views of a typical fully configured DSX-3 (DSX-4H-24) Rear Cross-Connect
System bay are shown in
chassis, each capable of holding up to 24 DSX-4H circuit modules. A fuse panel located near
the top of the bay supplies power to each chassis. Provision for an AC outlet is located at the
bottom of the bay. Rings and brackets at the back of the bay allow for routing and securing
equipment in/out cables and cross-connect jumpers.
Equipment and cross-connect cabling to the cross-connect system bay is by means of BNC or
TNC coaxial connectors located on the back of the circuit module. Each circuit module also
has standard or midsize coaxial jacks on the front for patching and monitoring.
Page 1-6
 2001, ADC Telecommunications, Inc.
Figures 1-3 and 1-4. The bay is comprised of up to ten module