Doosan D50S-5 Operation & Maintenance Manual page 14

Table of Contents

Advertisement

Tilt an elevated load forward only when directly over
Tilt an elevated load forward only when directly over
unloading area and with load as low as possible.
unloading area and with load as low as possible.
Do not stunt ride or indulge in horseplay.
Do not stunt ride or indulge in horseplay.
Always look and keep a clear view of the path of
Always look and keep a clear view of the path of
travel.
travel.
Travel in reverse if load or attachment obstructs
Travel in reverse if load or attachment obstructs
visibility.
visibility.
Use
Use
obstructed.
obstructed.
Stay in designated travel path, clear of dock edges,
Stay in designated travel path, clear of dock edges,
ditches, other drop-
ditches, other drop-
offs and surfaces which cannot safely support the lift
offs and surfaces which cannot safely support the lift
truck.
truck.
Slow down and use extra care through doorways,
Slow down and use extra care through doorways,
intersections and other location where visibility is
intersections and other location where visibility is
reduced.
reduced.
Slow down for cross aisles, turns, ramps, dips,
Slow down for cross aisles, turns, ramps, dips,
uneven or slippery surfaces and in congested areas
uneven or slippery surfaces and in congested areas
and avoid pedestrians, other vehicles, obstruction,
and avoid pedestrians, other vehicles, obstruction,
pot holes and other hazards or objects in the path of
pot holes and other hazards or objects in the path of
travel.
travel.
Always
Always
use
use
operation conditions Do not permit. Do not operate
operation conditions Do not permit. Do not operate
lift truck in high stacking areas without overhead
lift truck in high stacking areas without overhead
guards.
guards.
When stacking, watch for falling objects. Use load
When stacking, watch for falling objects. Use load
backrest extension and overhead guard.
backrest extension and overhead guard.
Refer to the topic "Operation Techniques" in the
Refer to the topic "Operation Techniques" in the
"Operation Section" of this manual.
"Operation Section" of this manual.
Loading or Unloading Trucks/Trailers
Loading or Unloading Trucks/Trailers
Do not operate lift trucks on trucks or trailers which
Do not operate lift trucks on trucks or trailers which
are not designed or intended for that purpose. Be
are not designed or intended for that purpose. Be
certain truck or trailer brakes are applied and wheel
certain truck or trailer brakes are applied and wheel
chocks in place (or be certain unit is locked to the
chocks in place (or be certain unit is locked to the
loading dock) before entering onto trucks or trailers.
loading dock) before entering onto trucks or trailers.
If trailer is not coupled to tractor, make sure the
If trailer is not coupled to tractor, make sure the
trailer landing gear is properly secured in place. On
trailer landing gear is properly secured in place. On
   
extreme
extreme
caution
caution
if
if
visibility
visibility
overhead
overhead
guards
guards
except
except
some trailers, extra supports may be needed to
some trailers, extra supports may be needed to
prevent upending or corner dipping.
prevent upending or corner dipping.
Be certain dock plates are in good condition and
Be certain dock plates are in good condition and
properly placed and secured. Do not exceed the
properly placed and secured. Do not exceed the
rated capacity of dock boards or bridge plates.
rated capacity of dock boards or bridge plates.
Lift Truck Parking
Lift Truck Parking
When leaving the operator station, park the lift truck
When leaving the operator station, park the lift truck
in authorized areas only. Do not block traffic.
in authorized areas only. Do not block traffic.
is
is
Park the lift truck level, with the forks lowered
Park the lift truck level, with the forks lowered
   
and the mast tilted forward until the fork ti
and the mast tilted forward until the fork tips
touch the floor.
touch the floor.
Move the direction control l
Move the direction control lever to NEUTRAL.
   
Engage the parking brake.
Engage the parking brake.
   
Turn the key switch off and remove the key.
Turn the key switch off and remove the key.
   
Turn the disconnect switch to OFF.
Turn the disconnect switch to OFF.
   
Block the drive wheels when parking on an
Block the drive wheels when parking on an
   
incline.
incline.
where
where
13
13
Safety Section
Safety Section
ps
ever to NEUTRAL.

Advertisement

Table of Contents
loading

This manual is also suitable for:

D60s-5D70s-5D80s-5D90s-5G50s-5G60s-5 ... Show all

Table of Contents