Doosan D50S-5 Operation & Maintenance Manual page 25

Safety Section Safety Section
Do not raise anyone on the forks of your lift truck. Do not raise anyone on the forks of your lift truck.
Do not let other people ride on the truck. Lift trucks Do not let other people ride on the truck. Lift trucks
are designed to carry loads, not people. e. are designed to carry loads, not peopl
Do not operate your truck without the load backrest Do not operate your truck without the load backrest
extension and overhead guard. Keep the load extension and overhead guard. Keep the load
against the backrest with the mast tilted backward. against the backrest with the mast tilted backward.
Do not lift or move loads that are not safe. Do not Do not lift or move loads that are not safe. Do not
pick up an off center load. Such a load increases the pick up an off center load. Such a load increases the
possibility of a tipover to the side. Make sure loads possibility of a tipover to the side. Make sure loads
are correctly stacked and positioned across both are correctly stacked and positioned across both
forks. Always use the proper size pallet. Position the forks. Always use the proper size pallet. Position the
forks as wide as possible under the load. Position forks as wide as possible under the load. Position
loads evenly on the forks for proper balance. Do not loads evenly on the forks for proper balance. Do not
lift a load with one fork. lift a load with one fork.
Do not overload. Always handle loads within the Do not overload. Always handle loads within the
rated capacity shown on the capacity plate. rated capacity shown on the capacity plate.
Do not add extra counterweight to the truck. An Do not add extra counterweight to the truck. An
overload can cause the truck to roll over and cause overload can cause the truck to roll over and cause
injury to personnel and damage to the lift truck. injury to personnel and damage to the lift truck.
Do not drive on soft ground. Do not drive on soft ground.
Observe all signs, especially those on maximum Observe all signs, especially those on maximum
permitted floor loadings, elevator capacities and permitted floor loadings, elevator capacities and
clearance heights. clearance heights.
Handle loads carefully and check them closely for Handle loads carefully and check them closely for
stability and balance. stability and balance.
Do not drive on slippery surfaces. Do not drive on slippery surfaces.
Sand, gravel, ice or mud can cause a tipover. Sand, gravel, ice or mud can cause a tipover.
If unavoidable, slow down. If unavoidable, slow down.
24 24