floppy.doc 63 Tue Jul 2 09:16:50 1996
Operating the Floppy Drive
This section describes how to perform tasks with your 3.5-inch floppy disk
drive.
Verifying the Floppy Drive Configuration
To verify that your workstation can communicate with the floppy drive, use
the ioscan command to see which devices are currently in use on your sys-
tem.
1 In a terminal window, enter the following at the prompt:
ioscan
After a few moments the ioscan utility lists all of the I/O devices it could
find. If there is a floppy drive in the list, that listing appears similar to the
following:
H/W Path
============================================
8
8/0
8/16/10
Using Your 3.5-Inch Floppy Disk Drive
Operating the Floppy Drive
Class
Description
bc
I/O Adapter
graphics
Graphics
unknown
Built-in Floppy Drive
63