Connecting To The Scsi Ports; System Scsi Port Connection; Rear Panel Scsi Connectors Without Terminators - HP Visualize c160 Owner's Manual
Hp visualize c160: owners guide
Hide thumbs
Also See for Visualize c160:
- Owner's manual (242 pages) ,
- Install manual (20 pages) ,
- Hardware installation manual (3 pages)
Table of Contents
Advertisement
C_scsi.doc 164 Tue Jul 2 14:56:06 1996
Figure 59
NOTICE:
SCSI Connections
Connecting to the SCSI Ports
Connecting to the SCSI Ports
This section describes how to connect to the system SCSI ports (single-
ended and fast, wide).
System SCSI Port Connection
The system contains two (2) SCSI connectors:
•
System Single-Ended SCSI Connector
•
System Fast, Wide SCSI Connector
Figure 59 shows the two SCSI connectors. SCSI cables connect to these
ports with a high-density thumb screw connector.
Rear Panel SCSI Connectors without Terminators
It is necessary to put a terminator on empty SCSI connectors on the
backpanel,or the last external device Terminators are shipped with
the system.
164
Single-ended SCSI
Fast, Wide SCSI
Advertisement
Table of Contents
Troubleshooting
