Replacing The Real Time (Rtc) Module - HP Visualize B1000 Supplementary Manual
Visualize b class and c class unix workstations
Hide thumbs
Also See for Visualize B1000:
- Owner's manual (246 pages) ,
- Install manual (42 pages) ,
- Supplementary manual (8 pages)
Table of Contents
Advertisement
Replacing the Real Time (RTC) Module
CAUTION
Explosion may result if the battery is incorrectly installed. Polarity dots must
be aligned.
1. Remove the new RTC Module from its packaging. Locate the polarity dot on the clock
module and align it with the polarity dot on the system board connector.
2. Press the RTC Module firmly into the system board, taking care not to bend the pins.
3. Connect the 6-pin power supply cable to the system board.
Chapter 2
Parts Removal and Replacement
Real Time Clock (RTC) Module
43
Advertisement
Table of Contents
