Figure 2-31. Preparing for Hard Disk Drive Insertion
2. Gently slide the drive tray the rest of the way into the slot, making sure the hinge hooks
engage the lip on the bottom of the slot. Push the release lever up and in—you will
notice that the hard drive's connectors seat securely into the hard-disk backplane board
at the back of the slot as the release lever is pushed home. Continue to push the release
lever up and in until the release hook goes through the slot in the release lever and
clicks in place, preventing the release lever from moving.
Figure 2-32. Hard Disk Drive Insertion
Release Hook
Release Lever
Hinge Hooks
Chapter 2
Parts Removal and Replacement
Release Hook
Release Lever
Hinge Hooks (hidden
from view on bottom
of release lever)
Hard Disk Drive
35