Installation Procedure - HP Vectra VL6 7 Administrator's Manual

Installation Procedure

To install the PCnet Family NDIS Client or Server driver, follow the instructions
given below:
1 Insert the LAN Disk into the flexible disk drive.
2 From the LAN Manager subdirectory, run LAN Manager SETUP to begin
3 Use the ALT key on your keyboard and the highlighted letter(C) to pull down the
4 From the Network Adapter Drivers dialog box, select the HP Ethernet Family
5 Then, enter the disk drive letter for the LAN Disk.
6 Select the HP Ethernet Family Adapter and choose OK.
7 Select the desired protocol from the Network Protocol dialog box and choose OK.
8 In the Workstation Configuration dialog box, select the HP Ethernet Family
9 Follow the remaining instructions from LAN Manager to complete the installation.
File Examples
During installation, LAN Manager will automatically make modifications to
CONFIG.SYS, AUTOEXEC.BAT, and PROTOCOL.INI files. Below is an example of
these files for the HP Ethernet Family Adapter.
CONFIG.SYS:
AUTOEXEC.BAT:
installation.
Configuration menu.
Adapter from the menu, if shown. Otherwise, select Other Driver to import the HP
Ethernet Family Adapter driver from the LAN Disk.
Adapter and choose OK.
DEVICE=C:\LANMAN.DOS\DRIVERS\PROTMAN\PROTMAN.DOS /i:C:\LANMAN.DOS
DEVICE=C:\LANMAN.DOS\DRIVERS\ETHERNET\PCNTND\PCNTND.DOS
SET PATH=C:\LANMAN.DOS\NETPROG;%PATH%
NET START WORKSTATION
LOAD NETBEUI
NET LOGON BEVERLY.SMITH
3 Installing Microsoft Network Drivers
LAN Manager 2.x DOS and OS/2 Client Driver
English 47