HP Vectra VL6 7 Administrator's Manual page 69

9 At the Copy Additional Network Adapter Drivers dialog box, type the path:
10 When the Copy Diskette dialog box is displayed, choose
11 Choose the
12 Highlight the appropriate protocols in the Protocols list box. Then choose
Editing
To change the configuration, you can edit keyword entries in the PCNTND_NIF
section of PROTOCOL.INI. Here is a sample of the PCNTND_NIF section in
PROTOCOL.INI to
PROTOCOL.INI:
Change the
Configuration
For keyword descriptions, refer to Driver Options - Software Keywords.
A:\IBM
Then choose .
OK
HP Ethernet Family Adapter with LAN Remote Power
Network Adapters list box, by highlighting the entry. Then choose
HP Ethernet Family Adapter to Current Configuration list box.
add them to the Current Configuration list box.
You have finished installing the driver for IBM LAN Services 4.0.
[PCNTND_NIF]
DRIVERNAME=PCNTND$
BUSTYPE=PCI1
LED2=0x90
4 Installing Other Network Drivers
NDIS 2.01 Driver for IBM LAN Services 4.0
.
OK
from the
to add the
Add
Add
English
to
69